IMO publishes outcome of MEPC 59 meeting

Amendments to the MARPOL Convention to prevent pollution during ship-to-ship oil transfer operations were adopted by the Marine Environment Protection Committee (MEPC) of the International Maritime Organization (IMO) when it met for its 59th session from 13 to 17 July 2009, at the IMO Headquarters in London.

In a packed agenda, the MEPC also agreed to circulate voluntary and interim measures to address greenhouse gas emissions from shipping.

The Committee adopted amendments to MARPOL relating to the on-board management of oil residue (sludge); approved, with a view to future adoption, proposed draft amendments to MARPOL to prohibit carriage or use of heavy grade oil in the Antarctic area; agreed, in principle, a proposal to designate specific portions of the coastal waters of the United States and Canada as an emission control area; and agreed guidelines relating to the implementation of MARPOL Annex VI, the ship recycling Convention and the Ballast Water Management Convention.

Amendments to MARPOL Annex I regulations 1, 12, 13, 17 and 38, relating to the on board management of oil residue (sludge), were also adopted. The amendments clarify long standing requirements and remove existing ambiguities in order to facilitate compliance by ships? crews. Definitions for oil residue (sludge), oil residue (sludge) tanks, oily bilge water and oily bilge water holding tanks are introduced for the first time.

Related amendments to the Supplement to the IOPP Certificate, Form A and Form B, and to the Oil Record Book were also adopted. The amendments are expected to enter into force on 1 January 2011.

The MEPC approved a proposal to designate specific portions of the coastal waters of the United States and Canada as an Emission Control Area (ECA). The ECA would be for the control of emissions of nitrogen oxides (NOx), sulphur oxides (SOx), and particulate matter, under the revised MARPOL Annex VI Prevention of Air Pollution from Ships, which was adopted in October 2008 and is expected to come into force on 1 July 2010.

The draft amendments to the revised MARPOL Annex VI concerning the proposed ECA will be submitted to MEPC 60 (March 2010) for adoption (i.e. after the deemed acceptance date of the revised MARPOL Annex VI on 1 January 2010).

Currently, the revised Annex lists two areas for the control of SOx emissions: the Baltic Sea area and the North Sea, which includes the English Channel.

Based on input received by the Joint Group of Experts on the Scientific Aspects of Marine Environment Protection (GESAMP), the Committee also approved Interim criteria for discharge of washwater from exhaust gas cleaning systems (exhaust scrubbers), intended to update the existing criteria contained in the Guidelines for Exhaust Gas Cleaning Systems (contained in resolution MEPC.170(57)).

The Committee approved circulars on Guidelines for the application of the NOx Technical Code relative to certification and amendments of tier I engines and Definitions for the cost effectiveness formula in regulation 13.7.5 of the revised MARPOL Annex VI.

Following the adoption of the Hong Kong International Convention for the Safe and Environmentally Sound Recycling of Ships, at a conference held in Hong Kong, China, in May 2009, the Committee adopted Guidelines for the development of the inventory of hazardous materials.

Progress was also made in developing draft Guidelines for safe and environmentally sound ship recycling. These are the first two guidelines intended to assist with the implementation of the Convention and are crucial for the voluntary implementation of the Convention prior to its entry into force.

The MEPC approved Guidance to ensure safe handling and storage of chemicals used to treat ballast water and the development of safety procedures for risks to the ship and crew resulting from the treatment process. This Guidance is intended to assist with the implementation of the International Convention for the Control and Management of Ships? Ballast Water and Sediments (BWM Convention), adopted in 2004.

The MEPC also agreed to give “final approval” to four ballast water management systems that make use of active substances and “basic approval” to three such systems.

The Ballast Water Review Group met during MEPC 59 to consider the status of ballast water technologies. Following its discussions, the Committee noted that the number of ballast water treatment technologies amounted to six Type Approved systems with four additional systems being granted Final Approval at this session. The Committee noted further that the installation of ballast water management systems may require extensive design consideration such as physical and technical feasibility, modification of ships designs and sufficient lead time necessary for these modifications.

While acknowledging the difficulties, the Committee agreed that ballast water treatment technologies were available and were currently being fitted on board ships and confirmed that sufficient ballast water management systems would be available to ships constructed in 2010. The Committee agreed to instruct the Secretariat to prepare a draft MEPC resolution, requesting Administrations to encourage the installation of ballast water management systems during new ship construction in accordance with the application dates contained in the BWM Convention, to be presented to MEPC 60 for consideration and adoption.

To date, 18 States have ratified the Convention, representing 15.27 per cent of the world?s merchant shipping. The Convention will enter into force twelve months after the date on which not fewer than 30 States, the combined merchant fleets of which constitute not less than 35 percent of the gross tonnage of the world?s merchant shipping, have become Parties to it. The Committee urged other States to ratify the Convention at the earliest opportunity.

The report of a correspondence group on Noise from commercial shipping and its adverse impact on marine life was considered, and the MEPC agreed to re-establish the correspondence group to continue its work on the future development of voluntary technical guidelines for ship quieting technologies.

The MEPC agreed to disseminate, via a circular, Guidance on best management practices for removal of anti fouling coatings from ships, including TBT hull paints, which was developed by the Scientific Groups under the Convention on the Prevention of Marine Pollution by Dumping of Wastes and Other Matter, 1972 (London Convention) and its 1996 Protocol (London Protocol).

The International Convention on the Control of Harmful Anti-Fouling Systems on Ships, 2001, entered into force in September 2008 and requires ships to either replace, or over-coat, any existing organotin-based anti fouling systems.