Author: Importer

Almost 80% of failures in Sulzer engines are of hot components, while the equivalent figure for MAN B&W is over 45%. These figures come from an analysis of the database set up…

Neither Wartsila NSD or Mitsubishi are marking the cylinder liners on its NOx certified low-speed engines. This is in contrast to MAN B&W which marks cylinder liners on its MC engines as…

Following the crankcase explosion on Sovereign Maersk MAN B&W has issued a Service Letter highlighting its recommendations. The main one is that in the event of an oil mist alarm, the engine…

Ruston has introduced a 280mm bore engine range with outputs up to 9MW (12,230 bhp) at 1,000 rev/min. This compares with a continuous fast ferry rating of 7,080kW (9,625 bhp) for the…

Thames Petroleum is supplying three SIT homogenisers for installation onboard the 32,520 dwt general cargo vessel Canelo Arrow. One will be sited ahead of the purifiers to reduce sludge output, a second…

MaK is to set up a European certified rebuild centre in Dordrecht, The Netherlands, to be operated by Bolier. The centre will rebuild items like turbochargers, cylinder heads, piston crowns, air coolers,…

TEC has launched the Lubetainer for the transportation and storage of lube oils, waxes and other non-hazardous liquids. It uses the company?s `cube` technology which gives the unit an additional 40 per…

Spanish company Detegasa , manufacturer of Delta bilge water separators, sewage treatment plants, and marine incinerators has produced a free CD-ROM to give owners and shipyards detailed information on waste management on…

The Touchstone 3 is a combined ultrasonic and paint thickness gauge which can simultaneously measure and display the thickness of both steel and coatings using only the first back echo, says Class…

Berendsen has introduced a new 3/8 BSP monoblock hydraulic directional control valve designed for flows up to 50 litres/min and pressures up to 350 bar. The valves can be operated by lever,…